Instruction manual

ImagePRO-II • User’s Guide 159
5. Web Remote Control Operations
Remotely Accessing Front-Panel Functions
The Emulator also provides:
• SEL and ESC buttons for making selections or backing out of menus
• Two navigation buttons — UP and DOWN — to take the place of the ADJUST
knob
• All the front-panel Input and Effects buttons
• Buttons to launch the Setup, Test Patterns, and Pan/Zoom menus
For information about using any of the front-panel menus or functions, refer to Chapter 4
Menu Orientation, on page 23.
i~ìåÅÜáåÖ=íÜÉ=cêçåí=m~åÉä=bãìä~íçê
 To l a u nc h t h e Front Panel Emulator, use the following procedure:
1. On the Web App Interface tab, click the Launch button below Front Panel
Emulator (Java Applet).
Figure 5-32. Front Panel Emulator Launch Button
2. The Front Panel Emulator is a Java applet that you must install the first time you
use the Emulator. To install it, follow the on-screen instructions.
If the Java applet is installed and you are prompted to run it, select either Run this
time or Always run on this site.
The Front Panel Emulator appears.
3. Click an Input button to select an input.
4. Click the SETUP button to access the Setup Menu. The menu appears in the
graphical display screen.
Launch the
Front Panel
Emulator