Instruction manual

150 ImagePRO-II • User’s Guide
5. Web Remote Control Operations
Configuring Outputs with the Web App Interface
 You can recall a saved configuration using the front panel, as described in Recalling
an Input Configuration, on page 50 of Chapter 4.
`çåÑáÖìêáåÖ=lìíéìíë=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The Output Main page provides a field for changing the output format, and also displays
menus for adjusting various color settings.
After configuring the output, you can save your settings for later use and recall them when
necessary. For details about these operations, refer to Backing Up and Restoring Data
with the Web Interface, on page 132 of this chapter.
To access Output Main from the Home page, choose Setup > Output > Output Main.
Figure 5-22. Output Main Page
The following topics are included in this section:
• Setting Output Format with the Web App Interface
• Adjusting Output Color Effects with the Web App Interface
• Adjusting Output Color Balance with the Web App Interface
• Setting an Area of Interest with the Web App Interface
• Obtaining Output EDID with the Web Interface
pÉííáåÖ=lìíéìí=cçêã~í=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The only available field on the Output Main page is the Format field. This field displays a
standard list of formats but does not include any custom formats you may have saved using
the front-panel Formats menu. To apply custom formats, refer to the Creating Custom
Formats section in Chapter 4 on page 73.
 To change the output format from the Output Main page, click the down arrow in the
Format field and select a format. If you select a format that is incompatible with the
output device, the output device does not display video. Otherwise, your change takes
effect immediately.