Instruction manual

ImagePRO-II • User’s Guide 145
5. Web Remote Control Operations
Working with the Home Page
The procedure in all three locations is the same:
 To change the input format, use the following procedure:
1. Select the input from the panel at the top of the page.
2. Click the down arrow in the Input Format field.
3. In the rotating list that appears, select the format you want. The format changes
immediately for the selected input. For information about using lists, refer to
Rotating Lists on page 140.
 To change the output format, use the following procedure:
1. Click the down arrow in the Output Format field.
2. In the rotating list that appears, select the format you want. The format changes
immediately for the selected input or output.
içÅâáåÖ=íÜÉ=cêçåí=m~åÉä=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
To lock the front panel from the Home page, click and hold down the Front Panel Lock
button and slide it to the right. When you release the button, the background of the button
turns green to indicate that the lock is active. When the front panel is locked, you can
continue to use the Web App Interface to adjust settings on the ImagePRO-II.
The default setting for Front Panel Lock is Off.
p~îáåÖ=póëíÉã=pí~íÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The Save System State button on the Home page saves all custom settings that you
create, whether you change them from the Web App Interface or the front panel.
oÉÑêÉëÜáåÖ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The Refresh button appears on every page of the Web App Interface. This button
refreshes the Web App Interface to update all settings you change using the front panel,
even settings that do not apply to the page you are viewing.
qê~åëáíáçåáåÖ=íç=~=içÖç=çê=_ä~Åâ=ïáíÜ=íÜÉ=tÉÄ=^éé=
fåíÉêÑ~ÅÉ
Select LOGO to transition to a stored logo. To transition back to the input video, click
LOGO again.
Select BLK to transition to internal black. To transition back to the input video, click BLK
again.
Note
The Input Format and Output Format lists do not include
custom formats you may have previously saved to the
ImagePRO-II. To apply a custom format, use the front panel
Input and Output menus.
Note
Settings you change using the front panel are not applied to
the Web App Interface until you click Refresh.