Instruction manual

ImagePRO-II • User’s Guide 139
5. Web Remote Control Operations
Web App Interface Features
päáÇÉêë
A slider lets you adjust values within a range. The available range and the units (i.e., pixels
vs. percentages) are determined by the parameter you are adjusting.
Figure 5-9. Web App Interface Slider
There are three ways to use the slider:
• Click the round button and hold it down as you drag it to the left or right.
• Click the editable text field to the left of the slider and type a new value. After you
click outside the field, the slider moves to the left or right, and the display reflects
the new setting.
• Click the editable text field and use the mouse wheel to scroll through the values.
låLlÑÑ=_ìííçåë
The buttons shown in the following illustration turn a feature on or off. When the
background of an On/Off button is green, the feature is turned On. When the background
of the button is gray, the feature is turned Off. In the following illustration from the Test
Patterns page, Raster Box is turned on and Diagonal Motion is turned off.
Figure 5-10. Two States of the On/Off Button
To turn a feature on or off, click the button and hold it down as you slide it to the left or right.
Your selection takes effect immediately.
rëáåÖ=tÉÄ=^éé=fåíÉêÑ~ÅÉ=jÉåìë
The Web App Interface displays two types of menus — the side menu that appears at the
left side of each page, and rotating pop-up lists that can be displayed for select fields.
rëáåÖ=íÜÉ=páÇÉ=jÉåì
The side menu is a dynamic list of submenu options, displayed on the left side of each
page. To open a submenu, click one of the options.
The options that appear in the menu change as you navigate through the Web App
Interface. On the Home page, the side menu presents the top-level menus shown in the
following illustration.