Instruction manual

130 ImagePRO-II • User’s Guide
5. Web Remote Control Operations
Web Interface Overview
tÉÄ=fåíÉêÑ~ÅÉ=lîÉêîáÉï
The ImagePRO-II Web Interface supports remote control of all ImagePRO-II features
from a computer, tablet, smartphone, or other web-enabled mobile device. For example,
you can download and restore logos and configuration files, upgrade system firmware, run
test patterns, control input and output settings, and undo recent changes.
The interface consists of three sections:
• The System Information tab, which provides information about the ImagePRO-II
firmware version and lets you see when a new version is available.
• The Backup and Restore tab, from which you can back up system configuration
files and logos, and restore them later. For more information about these features,
refer to Backing Up and Restoring Data with the Web Interface
, on page 132
of this chapter.
• The Web App Interface tab, from which you can launch either the Web App
Interface, which lets you remotely control most ImagePRO-II features, or the
Front Panel Emulator, a Java applet with which you can control all front-panel
functions.
mêÉêÉèìáëáíÉë=íç=rëáåÖ=íÜÉ=tÉÄ=fåíÉêÑ~ÅÉ
To access the Web Interface, you must have:
• A PC, laptop, tablet, or mobile device with one of the following operating systems
installed:
~ Windows
®
XP, Windows
®
Vista™, or Windows
®
7
~ Mac OS
®
X
~ Red Hat
®
Linux
®
• One or more customer-supplied RJ-45 Ethernet cables
• A web browser
• An Ethernet Switch, if you do not connect directly to the unit
• The IP address of the ImagePRO-II
The default IP address for the ImagePRO-II is 192.168.0.201. If your unit is
assigned a different IP address, use the front panel to locate it: Select Ethernet
from the System Menu, and scroll to IP.
You can also access the ImagePRO-II over a wireless network. Refer to your network
administrator for a network user ID and password.
Note
To access the Web Interface, you can use most standard
browsers. Using the Web App Interface, which operates the
ImagePRO-II requires an HTML5-compatible browser. For
more information, refer to Accessing the Web App Interface
on page 135 of this chapter.