Instruction manual

ImagePRO-II • User’s Guide 125
4. Menu Orientation
Working with Audio
Figure 4-113. Input Audio Map Submenu
On this submenu,
~ The HDMI, DisplayPort, SDI 1 and SDI 2 inputs default to Self. The other
options for these inputs are Mute, Analog, and AES.
• Self. If the video on these inputs contains embedded audio, the
embedded audio is output.
• Mute
prevents audio from playing on any output when this input
is selected.
• Analog maps the input to the analog input pair on the Audio
mezzanine.
• AES maps the input to the digital audio channels 1 through 8 on
the Audio mezzanine.
~ The DVI and HD-15, the logo, and internal black all default to Mute.
These inputs cannot contain embedded audio. The other options for
these inputs are Mute, Analog, and AES. This options function as
described for the HDMI, DP, SDI 1 and SDI 2 inputs.
~ All Inputs defaults to Mute. The other options for All Inputs are Analog,
AES, and Self.
If you select All Inputs on this submenu, the ImagePRO-II overrides any
settings on individual inputs.
~ Reset to defaults sets all inputs to the default values shown in the
previous illustration.
• Direct Map. This option maps to a single selected audio source, regardless of
which input is selected, including the logo and internal black.
The available options are: Mute, Analog, AES, HDMI, DP, SDI 1 and SDI 2.
• Input Status. This selection opens a submenu that displays the status of any
input that can process audio, as well as external digital input from the Audio
mezzanine. The possible status settings are:
~ None. Audio is not present.
~ OK. Audio is present.
• Setup. This option opens the Audio Setup Submenu shown in the following
illustration.
IN AUDIO MAP
> In 1 (DVI) Mute
In 2 (HD-15) Mute
In 3 (HDMI) Self
In 4 (DP)
Self
In 5 (SDI 1)
Self
In 6 (SDI 2)
Self
Logo Mute
Black Mute
All Inputs Mute
Reset to defaults