Instruction manual

104 ImagePRO-II • User’s Guide
4. Menu Orientation
Restoring Factory Default Settings
oÉëíçêáåÖ=^ää=c~Åíçêó=pÉííáåÖë
 To restore all default settings to the ImagePRO-II, use the following procedure:
1. Select Factory Reset from the Setup Menu. The Factory Reset Menu appears.
2. Select Factory Reset. A prompt appears, asking if you want to clear all
configurations, formats, and views.
3. Press SEL. The system turns off, then reboots.
If you press ESC to cancel the operation instead, your custom settings remain in
place and you are returned to the Factory Reset Menu.
oÉí~áåáåÖ=íÜÉ=fm=^ÇÇêÉëë=tÜÉå=oÉëíçêáåÖ=c~Åíçêó=
pÉííáåÖë
 To restore default settings to the ImagePRO-II but retain the unit’s IP address, use the
following procedure:
1. Select Factory Reset from the Setup Menu. The Factory Reset Menu appears.
2. Select Factory Reset, Save IP. A prompt appears, asking if you want to clear all
configurations, formats, and views.
3. Press SEL to reset the system but save the IP address. The system turns off, then
reboots.
If you press ESC to cancel the operation instead, your custom settings remain in
place and you are returned to the Factory Reset Menu.