Instruction manual

ImagePRO-II • User’s Guide 101
4. Menu Orientation
Setting up an LED Wall
pÉííáåÖ=ìé=~å=iba=t~ää
The LED Setup Submenu, shown in the following illustration, provides a quick way to
position the video image on an LED wall or another display device. Select Setup > LED
Setup to view this menu.
Figure 4-92. LED Setup Menu
To set up the wall, you define the Area of Interest and size the image within that area. Then
you can save your settings or restore the default values.
On this menu:
• Wall Sizing (AOI) displays the Area of Interest Submenu described in Setting
the Area of Interest on page 56 of this chapter.
• In standard system mode, Image Sizing displays the following Zoom/Pan
Submenu, which provides options in addition to those that appear when you
press the PAN/ZOOM button.
Figure 4-93. Zoom/Pan Menu (LED Setup Submenu)
With the 3D/Dual Channel mezzanine installed and the system mode set to
Dual2K, this menu includes a line that supports selecting the channel and
adjusting all outputs mapped to the selected channel.
LED SETUP
> Wall Sizing (AOI) >>
Image Sizing >>
Save Snapshot
ZOOM/PAN
> Match Input 1:1
Fill H
Fill V
Fill H/V
Zoom H 1280
Zoom V 960
Zoom H/V
Pan H +0
Pan V +0
Units Pixel
Save View
Recall View
Reset