Instruction manual

ImagePRO-II • User’s Guide 99
4. Menu Orientation
Using a Logo or Internal Black
output, using the timings you create in Setting Transitions on page 83.
When the logo is displayed:
• The PAN/ZOOM button and the Input Menu are not available.
• The Status Menu indicates LOGO as the input format and shows the resolution of
the captured logo.
If, after capturing a logo, you change the output format, and the logo format is
higher resolution than the output format, the logo appears to be cropped.
Figure 4-90. Logo Image in Two Different Output Formats
If the logo format is lower resolution than the new output format, the entire logo
appears within the output active area and black bars are placed at the edges as
necessary.
Figure 4-91. Logo Image at Lower Resolution than Output Format
To take a logo off display, but keep it in memory, select another input.
aÉäÉíáåÖ=~=içÖç=
Deleting a logo means making it unavailable for use, but not completely removing it from
Original logo format
Logo in lower resolution output