Specifications
Table Of Contents
- toc
- 1. Packaging
- 2. Installation guidelines
- 3. Installation
- 4. Connections
- 5. Setup
- 6. Getting started
- 7. Advanced
- 7.1 The OSD Menu
- 7.2 Using the Dialog boxes
- 7.3 Source selection
- 7.4 General
- 7.5 Image
- 7.6 Lamp management
- 7.7 Image files
- 7.8 Display setup
- 8. Maintenance
- 9. Image files
- 10. Troubleshooting
1. Packaging
How to unpack the projector
1. Release the cord straps.
PULL
TO OPE
Image 1-2
2. Remove the assembly from the pallet
3. Remove the cardboard cover
4. Remove the large cardboard
5. Remove the 8 foam parts
6. Loosen and remove the 3 screws spacers fixing the projector to the wooden board
7. Remove the projector from the board
Save the original shipping carton and packing material, they will be n ecessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
4 R59770079 BARCO ID H250/500 23/07/2007