user manual

ManualsBrandsBarco ManualsHome Security SystemHome Security System 26-0702000-00

FSN Series • User’s Guide • Rev 01 79

3. Control Panel Orientation

Control Panel Descriptions

4) Effects Group

The two buttons in the Effects Group indicate which effects are armed for the

next transition in the PGM bank.

Figure 3-10. Effects Group

To use the group, press the button for the transition you want to enable. Note that

MIX and WIPE are mutually exclusive.

Following are descriptions of each button in the Effects Group:

~ Press MIX to arm the PGM bank for a mix, using the layers enabled in

the Next Transition Group. The mix can be performed manually or

automatically. Transition combinations are:

• MIX + BG: Background mix

• MIX + DSK: Mix DSK, on or off

• MIX + BG + DSK: Mix background and DSK

~ Press WIPE to arm the PGM bank for a wipe transition, using the layers

enabled in the Next Transition Group. The wipe can be performed

manually or automatically. Transition combinations are:

• WIPE + BG: Background wipe

• WIPE + DSK: Wipe DSK, on or off

• WIPE + BG + DSK: Wipe background and DSK

5) Cut

Press CUT to instantly cut to the PGM bank layers that are enabled in the Next

Transition Section. For example:

S BG enabled — press CUT to cut from PGM to PST.

S DSK enabled — press CUT to cut the DSK on or off.

S BG + DSK enabled — press CUT to cut from PGM to PST, and

simultaneously cut the DSK on or off.

6) Auto Transition

Press AUTO TRAN to trigger an automatic transition to or from the layers enabled

in the Next Transition Group. The transition uses the “type” of transition enabled

in the Effects Group, and the PGM bank’s current transition rate. For example:

S BG + MIX enabled — press AUTO TRAN to mix from PGM to PST.

MIX WIPE

MIX

Note

After a mix transition has been armed, press and hold MIX to

display the Transition Menu, which lets you to set transition

rates and curves. In Chapter 5, refer to the “Transition

Menu” section on page 148 for details.

WIPE

Note

After a wipe transition has been armed, press and hold WIPE

to display the Wipe Menu, which lets you to choose wipe

patterns and adjust parameters. In Chapter 5, refer to the

“Wipe Menu

” section on page 151.

CUT

AUTO

TRAN