user manual

FSN Series • User’s Guide • Rev 01 31

NK==fåíêçÇìÅíáçå

Connectivity Diagrams

póëíÉã=O=Ô=jìäíáéäÉ=aÉëíáå~íáçåë

The figure below illustrates a sample system in which individual Aux outputs are routed to

different destinations.

Figure 1-4. Block diagram, multiple destination FSN Series system (sample)

This configuration is ideal for a setup consisting of three projected images behind a

podium. The left and right images are identical (as switched on M/E 1), and the center

image can be identical, or different from the two “wing” projectors (as switched on the PGM

bank). By connecting Aux outputs to different projectors, the TD has complete creative

control over the look, with the ability to display different setups on the projectors.

In the diagram:

• Multiple scaled and un-scaled sources connect to the FSN-1400, including

cameras, PCs, VTRs, DVRs and servers.

• The FSN-1400 and FSN-150 connect via Ethernet.

• Aux outputs 1, 2 and 3 connect to the three projectors.

• Aux outputs 4, 5 and 6 are connected to peripheral devices, such as monitors and

VTRs. In practice, this enables the TD to provide completely independent stage

or green room monitors, plus the ability to record the output of the entire event.

Aux 1

M/E 1

Aux 2

PGM

Aux 3

M/E 1

Aux 4

Green Room

VTR / DVR

Ethernet

Cameras

Analog / Digital

Server

Program Preview

Aux 5

Production

Aux 6

ISO Camera Record

Center

Screen

Right

Screen

Left

Screen

FSN-150

FSN-1400