User Guide

Random Access Adjustment Mode
5975646A BARCOGRAPHICS 8100LC 130696
11-5
Random Access Adjustment Mode
11-5
5975646A BARCOGRAPHICS 8100LC 130696
Edit file
The Edit file menu makes it possible to change the settings of the file
according to the real settings of the connected source. Consult the
source specification before entering the data.
To start up the EDIT menu, push the control stick forward or back-
ward to select EDIT in the FILE menu and press
ENTER.
Select with or
then <ENTER>
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
EDIT FILE
Filename Src Resolution
-----------------------------------------------------
pal .s01 1 675x278i
pal .c01 1 675x278i
secam .s03 3 675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or ,
<ENTER> to accept
<EXIT> to return.
Select the file which must be edited (mostly the active file) and press
ENTER.
The Edit file adaptation menu will be displayed.
The file name will be displayed in the upper right corner.
The following items can be adjusted :
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal shift in pixels
Horizontal period in µs (is automatically adapted during the installa-
tion of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of
a file with LOAD)
Active vertical lines
Vertical shift in lines
Interlaced : toggle on/off (is automatically set to its correct position
during the installation of a file with LOAD)
All settings can individually be changed. Push the joy stick key
forward or backward to select an item. The color of the selected item
will change and follow one of the three methods to change the value.
a. press
ENTER to activate the digits and enter directly with the
numeric keys on the RCU or local keypad the new value or
b. press
ENTER to activate the digits. Push the joy stick key to the
right or to the left to select the changing digit. Push the joy stick key
Edit file
The Edit file menu makes it possible to change the settings of the file
according to the real settings of the connected source. Consult the
source specification before entering the data.
To start up the EDIT menu, push the control stick forward or back-
ward to select EDIT in the FILE menu and press
ENTER.
Select with or
then <ENTER>
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
EDIT FILE
Filename Src Resolution
-----------------------------------------------------
pal .s01 1 675x278i
pal .c01 1 675x278i
secam .s03 3 675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or ,
<ENTER> to accept
<EXIT> to return.
Select the file which must be edited (mostly the active file) and press
ENTER.
The Edit file adaptation menu will be displayed.
The file name will be displayed in the upper right corner.
The following items can be adjusted :
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal shift in pixels
Horizontal period in µs (is automatically adapted during the installa-
tion of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of
a file with LOAD)
Active vertical lines
Vertical shift in lines
Interlaced : toggle on/off (is automatically set to its correct position
during the installation of a file with LOAD)
All settings can individually be changed. Push the joy stick key
forward or backward to select an item. The color of the selected item
will change and follow one of the three methods to change the value.
a. press
ENTER to activate the digits and enter directly with the
numeric keys on the RCU or local keypad the new value or
b. press
ENTER to activate the digits. Push the joy stick key to the
right or to the left to select the changing digit. Push the joy stick key