User Guide

Connections
Connections
7-14
5975646A BARCOGRAPHICS 8100LC 220496
5975646A BARCOGRAPHICS 8100LC 220496
7-14
Connecting a RCVDS 800 or RCVDS 05 to the
BARCOGRAPHICS 8100LC.
- Up to 10 inputs with one RCVDS800 or 20 inputs with the RCVDS
05 and 90 inputs when RCVDS's are linked via the expansion
module.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the
BARCOGRAPHICS 8100LC (source selection and analog
settings).
- The selected source number will be displayed on a 2 digit display
and the selected input module will be indicated with a LED on the
rear.
For more information about the use of :
the RCVDS 800, consult the owner's manual, order number :
R5975004.
the RCVDS 05, consult the owner's manual, order number : R5975765.
Connecting a VS05 to the BARCOGRAPHICS
8100LC.
The VS05 can switch up to 5 Composite Video sources, 3 Super
Video sources and 1 RGB analog or component video source to the
BARCOGRAPHICS 8100LC. In addition, the audio signal proper to
the source, can be switched to an audio amplifier.
Order number : R9827890
For more information about the use of the VS05, consult the VS05
owner's manual, BARCO order number : R5975245.
Connecting an IR Remote Receiver 800 to the
BARCOGRAPHICS 8100LC.
Screen
Communication cable
BARCOGRAPHICS 8100
IR Remote Receiver 800
Projection room
Control room
This infrared red receiver unit makes it possible to control the
BARCOGRAPHICS 8100LC from another room.
There is a communication line cable between the IR receiver and the
projector or the RCVDS. The control information from the RCU can
now be sent to the IR Remote Receiver 800.
The IR Remote Receiver 800 displays the selected source on a 7-
segment display.
Order number : R9827515.
Connecting a RCVDS 800 or RCVDS 05 to the
BARCOGRAPHICS 8100LC.
- Up to 10 inputs with one RCVDS800 or 20 inputs with the RCVDS
05 and 90 inputs when RCVDS's are linked via the expansion
module.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the
BARCOGRAPHICS 8100LC (source selection and analog
settings).
- The selected source number will be displayed on a 2 digit display
and the selected input module will be indicated with a LED on the
rear.
For more information about the use of :
the RCVDS 800, consult the owner's manual, order number :
R5975004.
the RCVDS 05, consult the owner's manual, order number : R5975765.
Connecting a VS05 to the BARCOGRAPHICS
8100LC.
The VS05 can switch up to 5 Composite Video sources, 3 Super
Video sources and 1 RGB analog or component video source to the
BARCOGRAPHICS 8100LC. In addition, the audio signal proper to
the source, can be switched to an audio amplifier.
Order number : R9827890
For more information about the use of the VS05, consult the VS05
owner's manual, BARCO order number : R5975245.
Connecting an IR Remote Receiver 800 to the
BARCOGRAPHICS 8100LC.
Screen
Communication cable
BARCOGRAPHICS 8100
IR Remote Receiver 800
Projection room
Control room
This infrared red receiver unit makes it possible to control the
BARCOGRAPHICS 8100LC from another room.
There is a communication line cable between the IR receiver and the
projector or the RCVDS. The control information from the RCU can
now be sent to the IR Remote Receiver 800.
The IR Remote Receiver 800 displays the selected source on a 7-
segment display.
Order number : R9827515.