User Guide

Connections
Connections
5975646A BARCOGRAPHICS 8100LC 220496
7-13
7-13
5975646A BARCOGRAPHICS 8100LC 220496
Connecting a computer, e.g. IBM PC (or
compatible), Apple Macintosh to the RS 232 input
of the projector.
RS232
connection
R
G
R
G
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0
I
This device complies with Part 15 of the FCC rul es. Operation
is subject to following two conditions :
(1) This device may not cause harmful interference
(2) This device must accept any interference received
including interference that may cause undesired operation
IR-ACK NOWLEDGED
IR -REC EI VED
DIAGNOSTICS
CODE
IR -REC EI VER
The BARCOGRAPHICS 8100LC projector has a RS232 port that
allows it to communicate with a computer.
Applications : remote control and data communications.
a) remote control :
- easy adjustment of projector via IBM PC (or compat-
ible) or MAC connection.
- allow storage of multiple projector configurations and
set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) data communications :
- sending data to the projector or copying the data from
the projector to a hard memory device.
Set up of the baud rate for communication with a
computer.
See 'Change Baudrate PC' in chapter 'Service mode' .
Connecting a computer, e.g. IBM PC (or
compatible), Apple Macintosh to the RS 232 input
of the projector.
RS232
connection
R
G
R
G
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0
I
This device complies with Part 15 of the FCC rul es. Operation
is subject to following two conditions :
(1) This device may not cause harmful interference
(2) This device must accept any interference received
including interference that may cause undesired operation
IR-ACK NOWLEDGED
IR -REC EI VED
DIAGNOSTICS
CODE
IR -REC EI VER
The BARCOGRAPHICS 8100LC projector has a RS232 port that
allows it to communicate with a computer.
Applications : remote control and data communications.
a) remote control :
- easy adjustment of projector via IBM PC (or compat-
ible) or MAC connection.
- allow storage of multiple projector configurations and
set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) data communications :
- sending data to the projector or copying the data from
the projector to a hard memory device.
Set up of the baud rate for communication with a
computer.
See 'Change Baudrate PC' in chapter 'Service mode' .