User Guide

Connections
Connections
5975646A BARCOGRAPHICS 8100LC 220496
7-3
7-3
5975646A BARCOGRAPHICS 8100LC 220496
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
Input selection :
VIDEO/S-VIDEO INPUT
On
On
Video input
Audio input not
available
S-Video input
TV tuner, e.g.
TVDM 40 stereo
VCR
Audio amplifier
Composite
Video
R
G
R
G
VCR S-VHS
Luma/Chroma
RS 232 IN
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0 I
This device complies with Part 15 of the FCC rules. Operation
is subject to following two conditions :
(1) This device may not cause harmful interference
(2) This device must accept any interference received
including interference that may cause undesired operation
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-RECEIVER
Key in the corresponding slot number on the RCU or the local
keypad. Depending on the priority setting in the Input slots
menu, Video or S-Video will be displayed. If the wrong
source type is displayed, start up the adjustment mode and
select Installation. Select the Input Slots menu. Highlight the
corresponding slot number with the arrow keys and press
ENTER to change the priority setting. To start up the
Adjustment menu, press
ADJUST or ENTER.
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
Input selection :
AUDIO
VIDEO/S-VIDEO INPUT
On
On
Video input
Audio input not
available
S-Video input
TV tuner, e.g.
TVDM 40 stereo
VCR
Audio amplifier
Composite
Video
R
G
R
G
VCR S-VHS
Luma/Chroma
RS 232 IN
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0 I
This device complies with Part 15 of the FCC rules. Operation
is subject to following two conditions :
(1) This device may not cause harmful interference
(2) This device must accept any interference received
including interference that may cause undesired operation
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-RECEIVER
Key in the corresponding slot number on the RCU or the local
keypad. Depending on the priority setting in the Input slots
menu, Video or S-Video will be displayed. If the wrong
source type is displayed, start up the adjustment mode and
select Installation. Select the Input Slots menu. Highlight the
corresponding slot number with the arrow keys and press
ENTER to change the priority setting. To start up the
Adjustment menu, press
ADJUST
or
ENTER
.