User Guide

Location and Functions of Control
5-2
Location and Functions of Control
5975646A BARCOGRAPHICS 8100LC 220496
5975646A BARCOGRAPHICS 8100LC 220496
5-2
Front panel terminology
RS 23 2 IN REMOTE
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY
COMMUNICATION PORT
(800-PERIPHERALS)
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0 I
This de vice co mplies with P art 1 5 of the FCC rules. Operati on
is subje ct to fo llowing two co nd itions :
(1) This device ma y not cause harmful interferen ce
(2) Th is device must a ccept any interferen ce rece ived
including inter ference tha t may cause un desired ope ration
2 3 4
9
11
10
1
5
6 7 8
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-REC EIVER
IR-Acknowledged : IR signals are recognized.
IR-Received : IR signals are received but not recog-
nized by the projector.
Diagnostics code : a) source number
b) error code : a two digits error code is displayed when
something goes wrong inside the projector.
IR receiver : receiver for control signals transmitted
from the RCU.
Power switch : '1' = on, '0' = off
Power input : autoranging from 100 to 230 Vac.
RS232 IN : to allow communication with external compu-
ter, e.g. IBM PC or compatible, Macintosh ...
RS232 OUT : used to connect to next projector, RS232IN
plug (communication link for PC or MAC to the next
projector).
Communication port : allows communication with the
800 peripherals.
Remote : remote input for wired remote control.
Projector mode indication : indicates the status of the
projector.
no lighting up : power switch is not pressed.
red lighting up : power switch is pressed, projector in
stand by mode.
green lighting up : projector in operational mode.
1
2
3
4
5
6
7
8
9
10
11
Front panel terminology
RS 23 2 IN REMOTE
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY
COMMUNICATION PORT
(800-PERIPHERALS)
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0
I
This de vice co mplies with P art 1 5 of the FCC rules. Operati on
is subje ct to fo llowing two co nd itions :
(1) This device ma y not cause harmful interferen ce
(2) Th is device must a ccept any interferen ce rece ived
including inter ference tha t may cause un desired ope ration
2 3 4
9
11
10
1
5
6 7 8
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-REC EIVER
IR-Acknowledged : IR signals are recognized.
IR-Received : IR signals are received but not recog-
nized by the projector.
Diagnostics code : a) source number
b) error code : a two digits error code is displayed when
something goes wrong inside the projector.
IR receiver : receiver for control signals transmitted
from the RCU.
Power switch : '1' = on, '0' = off
Power input : autoranging from 100 to 230 Vac.
RS232 IN : to allow communication with external compu-
ter, e.g. IBM PC or compatible, Macintosh ...
RS232 OUT : used to connect to next projector, RS232IN
plug (communication link for PC or MAC to the next
projector).
Communication port : allows communication with the
800 peripherals.
Remote : remote input for wired remote control.
Projector mode indication : indicates the status of the
projector.
no lighting up : power switch is not pressed.
red lighting up : power switch is pressed, projector in
stand by mode.
green lighting up : projector in operational mode.
1
2
3
4
5
6
7
8
9
10
11