User Guide

Appendix B : Battery Replacement in the RCU
5975646A BARCOGRAPHICS 8100LC 220496
B-1
Appendix B : Battery Replacement in the RCU
5975646A BARCOGRAPHICS 8100LC 220496
1-1
Battery replacement in the RCU.
Remove the battery cover on he backside of the remote control by pushing the indicated handle a
little to the bottom of the RCU. Lift up the top side of the cover at the same time.
(fig. 1)
Remove the battery from the compartment and disconnect the contact plate. (fig. 2)
Connect a new 9 V battery (E-block type, e.g. type 6F22S or equivalent) to the contact plate.
Insert the battery back into the compartment.
Put the cover back.
fig. 1
310a.DRW
Contact
plate
Battery
fig. 2
Battery replacement in the RCU.
Remove the battery cover on he backside of the remote control by pushing the indicated handle a
little to the bottom of the RCU. Lift up the top side of the cover at the same time.
(fig. 1)
Remove the battery from the compartment and disconnect the contact plate. (fig. 2)
Connect a new 9 V battery (E-block type, e.g. type 6F22S or equivalent) to the contact plate.
Insert the battery back into the compartment.
Put the cover back.
fig. 1
310a.DRW
Contact
plate
Battery
fig. 2