User Guide

Optional Equipment
14-4
5975646A BARCOGRAPHICS 8100LC 220496
Optional Equipment
14-4
5975646A BARCOGRAPHICS 8100LC 220496
MAGIK Interface
Multifuctional Analog Graphics Interface Kit.
BARCO's MAGIK interface allows the user to connect a presentation
device such as a projector or a professional monitor to any computer
with analog video signal with or without maintaining the connection
with its own display. The MAGIK interface buffers and amplifies any
RGB analog signal with TTL or analog sync without signal loss or
image degradation.
The MAGIK can be delivered together with connection cables for PC,
MAC, SUN or workstation in a nice handbag case.
Order numbers MAGIK with cables and case :
R9828129 (120V)
Order number MAGIK only :
R9828128 (120V)
Adapter and communication cables
BARCO provides several cables to connect peripheral equipment to
the BARCOGRAPHICS 8100.
a. D9-D9 communication cable
- To connect an IBM PC (or compatible) to the projector.(only if the
optional RS232 port is installed.)
- To connect a RCVDS 800/RCVDS 05 to the BARCOGRAPHICS
8100.
- To connect a IR receiver to the RCVDS or to the BARCOGRAPHICS
8100.
- To be used as extension cable for all other adapter cables.
MAGIK Interface
Multifuctional Analog Graphics Interface Kit.
BARCO's MAGIK interface allows the user to connect a presentation
device such as a projector or a professional monitor to any computer
with analog video signal with or without maintaining the connection
with its own display. The MAGIK interface buffers and amplifies any
RGB analog signal with TTL or analog sync without signal loss or
image degradation.
The MAGIK can be delivered together with connection cables for PC,
MAC, SUN or workstation in a nice handbag case.
Order numbers MAGIK with cables and case :
R9828129 (120V)
Order number MAGIK only :
R9828128 (120V)
Adapter and communication cables
BARCO provides several cables to connect peripheral equipment to
the BARCOGRAPHICS 8100.
a. D9-D9 communication cable
- To connect an IBM PC (or compatible) to the projector.(only if the
optional RS232 port is installed.)
- To connect a RCVDS 800/RCVDS 05 to the BARCOGRAPHICS
8100.
- To connect a IR receiver to the RCVDS or to the BARCOGRAPHICS
8100.
- To be used as extension cable for all other adapter cables.