Specifications

Display Controller Installation
37
7. Align the display controller(s) for your BARCO NIO Display System
with the slot(s) and press it(them) in firmly until the card(s)
is(are) fully seated.
Note: The next step applies only to the MXRT 7300.
8. Connect the power cable to the 6-pin power connection on the
graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Power connection for the MXRT 7300 controllers
9. Screw in or fasten the display controller securely. Replace and
secure the computer cover.
10. Connect your B
ARCO NIO Displays to the display controller(s) for
your B
ARCO NIO Display System using the cables supplied. Make
sure all cables are securely connected before turning on your
system.
6-pin graphics controller
power cable