Specifications

Display parts, controls and connectors

Rear view of MDNC-2121

Figure 4: Rear side

1. Connector compartment cover

To get access to the connectors, remove the cover by pulling

down the 2 clips at the top of the cover.

2. Tilt & swivel foot cover

This cover is packed in a separate box when the display is

shipped to the customer.

3. Tilt & swivel foot

4. Slot for security cable (e.g., Kensington lock)

5. DisplayPort video input

6. DVI (digital) video input

7. USB upstream port

Connect this connector to the PC USB bus if you wish to connect

USB devices to the display’s USB downstream port.

8. USB downstream port

4 5 7