User Manual

6. CSE-200 Configurator
- If the launcher service is running hold d own the shift key w hile con necting the Button to the PC, until logging is started.
- If the launcher service is not running : hold down the shift key while double clicking the ClickShare application.
The following mess age appears on the sys tray:
Image 6-47
Client logging
6.30 Factory defaults
About default settings
The ClickShare Base Unit can return to the factory default settings.
The following settings are the d efaults:
• Meeting room identification info is cleared.
• Language is set to English.
• Custom wallpapers are removed and the default w allpaper is restored.
• Standby timer is reset to 10 min.
• Hostname and SSID is s et to clickshare-serialnumber.
• The SSID is broadcasted
• WiFi password is reset to clickshare.
• The default W iF i chann el is set back to frequency 5 GHz, channel 36.
• The update history is cleared.
• The table with the associated Buttons is cleared.
• The admin password is reset to admin.
• Debug logging and remote logging are disabled.
Restoring to factory defau lts will r e quire a r epairing of the Buttons used with this Ba s e Unit.
How to restore factory defaults
1. LogintotheConfigur ator.
2. Click Support & Updates → Troubleshoot.
R5900023 CLICKSHARE CSE-200 24/05/2017
63