User Manual

6. CSE-200 Configurator
How to start up for WPA2-PSK
1. LogintotheConfigur ator.
2. Click WiFi & Network → Network integration.ClickonChange configu r aton.
3. Select the r adio button next to WPA2-PSK and click Next.
Image 6-30
Network integration, WPA2-PSK selected
The WPA2-PSK mode window opens.
Necessary Data to continue:
Image 6-31
Corporate S SID The SSID of your corporate wireless infrastruc
ture to which the ClickS hare Buttons will connect.
Passphrase
(Pre-shared key)
The key used in WPA2-P SK to authenticate onto
the wireless infrastructure. T his can be a string of
64 hex adecim al digits or a pas sphrase of 8 to 63 printable ASCII characters.
Click Next to continue.
When having problems connecting the Button to you r corporate network, to get feedback from the Button please have a look at
the ClickShare Client log. This log can b e pressing the holding Shift key when s tarting the Client executable. Look for the lines
“EDSUSBDongleConnec tion::mpParseDongleMessages”. An error code and a short sum mary of the issue shou ld be logged.
6.17 Services, mobile devices
ClickShare app
This function enables the possibility to connect with a mobile device using the ClickSha re app to connect to the B a se Unit.
It is enabled by defa ult. When the Base Unit is integrated in the corporate network, it may be required to disable content sharing
from the C lickShar app.
About streaming information via AirPlay
Before you can stream information and display it via ClickShare your device m ust be connected with the wireless network of the
Base Unit. Then AirPlay mus t be activated on your dev ice. For more information about a ctivating AirPlay, consult the user guide of
your device.
50
R5900023 CLICKSHARE CSE-200 24/05/2017