Manualshelf

User guide

ManualsBrandsBarco ManualsLED displaysCoronis Fusion 6MP LED
31323334353637383940
5. Advanced operation
Automatic In this mode, your display automatically detects the
connected video input signals, attaches them to the
correct display side and applies the correct video
settings to it (resolution, video encoding mode,
refresh rate,...). No video settings are available
when this mode is selected.
One Image Source This mode is intended for displaying and manually
configuring only one connected video input signal.
When selecting this mode, the video settings
become available for the selected video input
signal.
Two Image Sources This mode is intended for displaying and manually
configuring two connected video input signals (one
on each display side). When selecting this mode,
the video settings become available for the selected
video input signal on each side of the display.
To select an image source selection mode:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
3. Enter the Image Source Selection submenu.
4. Select one of the available image source selection modes and confirm.
5.24 Video inp ut signals
Your Coronis Fusion 6MP display automatically detects the connected video input sig-
nals. Manually selecting image source video input signals is possible, but then your
display’s image source selection mode should be set to allow this. Please refer to "Im-
age source selection modes", page 30 to do this.
About input signals
The available input signals for your display are:
DisplayPort 1 The input corresponding to the DisplayPort 1
connector.
DVI 1 The input corresponding to the DVI 1 connector.
DisplayPort 2 The input corresponding to the DisplayPort 2
connector.
DVI 2 The input corresponding to the DVI 2 connector.
Automatic Selection
The input is automatically selected.
To manually select a video input signal:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > (Left/Right) Image Source menu.
3. Enter the Input Signal submenu.
4. Select one of the available input signals and confirm.
K5902055 CORONIS FUSION 6MP 14/11/2014
31