User guide

5. Advanced operation
To enable/disable hibernation on your display:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Hibernate submenu.
4. Select Enabled/Disabled as desired and confirm.
To specify th e hibernate timeout:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Hibernate Timeout submenu.
4. Set the timeout value as desired and confirm.
5.12 Luminance target
About the luminance target
The luminance target of your Coronis Fusion 6MP is adjustable over a predefined range. When you
change the luminance target, the display will adjust its backlight to reach the target.
To set the luminance target:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration menu.
3. Enter the Luminance Target submenu.
4. Set a luminance target value as desired and confirm.
The default, factory DICOM calibrated luminance value is availa ble in t he technical spec-
ifications table. The guaranteed backlight lifetime is valid for this setting.
5.13 Color presets
About color presets
The available color preset settings for your display are:
Clearbase Simulation of the clearbase film color temperature.
Bluebase
Simulation of the bluebase film color temperature.
User When selecting the User color temperature setting,
youwillbeabletomanuallydefine the X and Y
coordinates or the display color temperature in
separate submenus.
Native White
The native, unmodified color temperature of the
LCD panel.
To select a color preset:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
K5902055 CORONIS FUSION 6MP 14/11/2014
23