User guide

Adjusting Luminance and Color
54
Color target definition
Note: For the Native White color target, only the luminance
target can be modified. For Clearbase and Bluebase the
luminance target and color temperature in (x,y) co-ordinates can
be modified. The User color target can be modified completely.
To modify the color target definition:
1. Touch any of the soft touch keys.
The front illumination is switched on.
2. While the illumination is on, touch the Enter
touch key to
display the main menu.
3. Use the Up
or Down touch keys to select the Luminance
and Color menu. Use Enter
to open the menu.
4. Use Up
or Down to select Color Definition. Use Enter to
open the submenu.
5. Select the color target you wish to modify. Thereto, use Up
or
Down
to select Color Name. Use Enter to go into edit
mode. Use Up
or Down to select the color target. Use Enter
to confirm the selection.
6. To modify the luminance target, use Up
or Down to select
Luminance Target. Use Enter
to go into edit mode. Use Up
or Down to change the value. Use Enter to save the
changes.
7. To modify the units in which the color temperature is defined
(only for User color target), use Up
or Down to select
Defined in. Use Enter
to go into edit mode. Use Up or
Down
to change the units: Kelvin units or (x,y) co-ordinates.
Use Enter
to save the changes.
8. To modify the color temperature in Kelvin units, first make sure
the color target is defined in Kelvin units (see step 5). Use Up
or Down to select Color Temperature. Use Enter to go into