User guide

Adjusting Luminance and Color
52
Adjusting Luminance and Color
Concepts
• On a grayscale display you can adjust the luminance target.
On a color display you can adjust the color target.
• The color target combines the luminance target and color
temperature.
• The color temperature can be defined in Kelvin units or (x,y)
co-ordinates.
• After changing the target, the display’s backlight and color
amplifiers (color displays only) will be adjusted until the
target is reached.
• The I-Guard sensor constantly measures the luminance and
color temperature (color displays only). These measurements
are used to adjust and stabilize the luminance and color
temperature (color displays only).
Luminance target (grayscale displays)
To change the luminance target:
1. Touch any of the soft touch keys.
The front illumination is switched on.
2. While the illumination is on, touch the Enter
touch key to
display the main menu.
3. Use the Up
or Down touch keys to select the Luminance
menu. Use Enter
to open the menu.
4. Use Up
or Down to select Luminance Target. Use Enter
to go into edit mode.
5. Use Up
or Down to adjust the luminance target.