User guide

Changing Display Functions

ALC & DICOM Options

DICOM offset

Introduction

DICOM DF will be recalculated only when another DICOM Offset is

selected. The DICOM DF will be recalculated based on the new offset

setting.

To select a DICOM offset:

1. Select the DICOM display function. See To select a display

function (DF):, on page 46.

2. In the ALC & DICOM Options menu, use Up

or Down to

select DICOM Offset. Use Enter

to go into edit mode.

3. Use Up

or Down to select an offset.

4. Use Enter

to save the changes.

You can select the following offsets:

Value Description

Dark Room The DICOM DF will be recalculated tak-

ing an ambient light value of 0 lux into

account.

This means that the measured ambient

light does not influence the DICOM DF.

Preset The DICOM DF will be recalculated tak-

ing a preset ambient light value into

account. This value is determined by the

selected Reading Room and can be

adjusted manually within certain limits.