User guide

Enabling/disabling User Controls
42
Enabling/disabling User Controls
To disable the user controls:
1. Open the OSD main menu.
2. Open the Settings menu.
3. Select User Controls.
4. Select Off.
5. Return to the Settings menu.
6. Exit the OSD
Now the user cannot display the OSD again until the user controls
keycode is entered (see below).
To enable the user controls again:
1. To enter the user controls keycode, the OSD must not be visible.
2. Touch any of the soft touch keys to switch on the front
illumination.
3. While the illumination is on, touch the following keys in
successive order:
Enter
, Down , Up , Down , Enter .
As a result, the User Controls setting in the Settings menu is switched
on again.