User guide

Changing the viewing mode

About viewing modes

The display contains two viewing modes. Diagnostic viewing mode

provides the full calibrated luminance. This mode is intended for using

the display in diagnostic applications.

In Text mode, the luminance is approximately half of the luminance in

Diagnostic mode. This is intended for using the display with office

applications such as word processing.

Switching viewing modes by means of the keys

While the OSD is not on the screen, touch the Up and Down

touch keys at the same time. As a result the display switches to

another viewing mode. The viewing mode is indicated by a message

that appears for a few seconds after switching the viewing mode.

Switching viewing modes by means of the OSD menus

You can also switch viewing modes in the Luminance and color menu.