User guide

On-screen display (OSD)
38
Calibration Information submenu
Settings menu
Name Description
Preset ambient value /
Measured ALC ambient
value / Average ambient
value
Shows the ambient light correction
value taken into account to calculate
the DICOM DF, expressed in lux.
Bright luminance Shows the bright luminance value taken
into account to calculate the DICOM DF.
Dark luminance Shows the dark luminance value taken
into account to calculate the DICOM DF.
Ambient correction Shows the ambient light correction
value taken into account to calculate
the DICOM DF, expressed in cd/m².
Name Description
DPMS Allows to switch the display power
management system on/off. See note
below.
Power LED Allows to switch the power LED’s on
state on/off. The LED's orange DPMS
state is not influenced by this setting.
So, when the display goes into power-
saving mode, the LED will turn orange,
even if it was switched off by this set-
ting.
User controls Allows to disable the touch keys on the
front.
When switched off, the user cannot dis-
play the OSD until the user controls key-
code is entered.