User guide

Display controls
30
3. To open a submenu, use the Up or Down touch keys to
select the submenu. Next, press the Enter
touch key to open
the submenu.
4. To exit from a submenu, use Up
or Down to select EXIT.
Next, press Enter .
If you exit from the Main Menu, you exit the OSD.
5. To change an adjustment value or setting, use Up
or Down
to select the adjustment or setting. Next, press Enter to go
into edit mode. This is indicated by the scroll bar becoming
longer.
Figure 6: Setting is selected
Figure 7: Edit mode is active
Use Up or Down to change the value. Use Enter to
confirm the change.
Changes are saved automatically after confirming.
6. Some items in the menus cannot be changed. They are read-
only values, displayed in light gray.
Tip:
While you are adjusting a value:
• Touching Up and Down at the same time resets to the last
stored value.
SETTINGS
DPMS On
Power LED On
User Controls On
EXIT
SETTINGS
DPMS On
Power LED On
User Controls On
EXIT