Specifications

EMC notice
21
sured field strength in the location in which the B
ARCO CORONIS Display is
used exceeds the applicable RF compliance level above, the B
ARCO CORONIS
Display should be observed to verify normal operation. If abnormal perfor-
mance is observed, additional measures may be necessary, such as re-ori-
enting or relocating the B
ARCO CORONIS Display.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less
than 3 V/m.
Recommended separation distance
The B
ARCO CORONIS Display is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The
customer of the user of the B
ARCO CORONIS Display can help prevent
electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment
(transmitters) and the B
ARCO CORONIS Display as recommended below,
according to the maximum output power of the communications
equipment.
At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Rated
maximum
output power
of transmitter
W
Separation distance according to frequency of transmitter
150kHz to 80MHz
80MHz to 800MHz 800MHz to 2.5GHz
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
11.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
P2.1d 
P2.1d 
P3.2d 