Specifications

Installing your Barco display controller
30
7. Align the display controller(s) for your BARCO CORONIS Display
System with the slot(s) and press it(them) in firmly until the
card(s) is(are) fully seated.
8. Note: This step applies only to the MXRT 5100 and MXRT 7100.
Connect the power cable to the 6-pin power connection on the
graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Figure 9: Power connection for the MXRT 5100 and 7100 controllers
9. Screw in or fasten the display controller securely. Replace and
secure the computer cover.
10. Connect your B
ARCO CORONIS Displays to the display controller(s) for
your B
ARCO CORONIS Display System using the cables supplied. Make
sure all cables are securely connected before turning on your
system. Figures 10 and 11 show the types of connections are
available:
6-pin graphics controller
power cable