User guide

Display information
34
ALC & DICOM Options
DICOM offset
Introduction
DICOM DF will be recalculated only when another DICOM Offset is
selected. The DICOM DF will be recalculated based on the new offset
setting.
To select a DICOM offset:
1. Select the DICOM display function.
2. In the ALC & DICOM Options menu, select DICOM Offset.
3. Select an offset.
4. Return to the ALC & DICOM Options menu.
You can select the following offsets:
Gamma 2.2
Gamma 1.8
Select one of these display functions in
case the display is to replace a CRT dis-
play with a gamma of 1.8 or 2.2 respec-
tively.
User This is a user-definable DF.
Name Description
Value Description
Dark Room The DICOM DF will be recalculated tak-
ing an ambient light value of 0 lux into
account.
This means that the measured ambient
light does not influence the DICOM DF.