User guide

Display information
24
3. Press the control wheel to enter the Settings menu.
Figure 7: Settings menu
4. Rotate the control wheel to select User Controls.
5. Press then rotate the control wheel to switch from “On” to “Off”.
6. Exit the menus.
To enable user controls:
1. Make sure the on-screen display is not on the screen.
2. Press and hold the control wheel for 10 seconds.
3. Rotate the control wheel 1 step clockwise.
4. Press the control wheel 2 times.
5. Rotate the control wheel 1 step counterclockwise. After 4
seconds the “Controls are now enabled” message appears.
Note: Steps 3 to 5 must be performed in maximum 3 seconds.
SETTINGS
DPMS On
Power LED On
User Controls On
Language English
Auto Menu Exit On
Preffered Input Native
EXIT