User manual

Coronis I-Switch Software

controller. If you change the physical orientation of one CORONIS display

connected to any given BarcoMed Display Controller, the CORONIS I-

Switch Software will change the resolution for both of the CORONIS

displays connected to that BarcoMed Display Controller and you will

need to change the physical orientation of the second display to match

the orientation of the first display.

Installation or Reinstallation

To install or reinstall the CORONIS I-Switch Software insert the BarcoMed

Software CD in the appropriate device on your computer and run the

BarcoMed Software Install Wizard and select only the CORONIS I-Switch

Software (please see the section Software Installation for complete

instructions).

Removal of CORONIS I-Switch Software

To remove the CORONIS I-Switch Software from your system use the

Windows “Add/Remove Programs” utility found in the Windows

Control Panel.

Or you may remove the CORONIS I-Switch Software from your system by

doing the following:

1. Click on the Windows “Start” button.

2. Click on “Run".

3. Type the following text in the dialog box: "cmd".

4. Click on "OK".

5. Type the following text in the command line window:

“coronisrotationservice /uninstall”

6. When the program has finished, closed the command line window.