User manual

Coronis I-Switch Software

Overview

Note: The CORONIS I-Switch Software is only available for systems

which have the Portrait Accelerator in the CORONIS Display Panel

and BarcoMed Display Driver releases that include the CORONIS I-

Switch Software. The CORONIS I-Switch Software may not be

available for your system.

The CORONIS I-Switch Software is designed to detect changes in the

physical orientation of the rotatable CORONIS flat-panel display(s) and

to change the resolution of the display to match the physical orientation

of the display. The CORONIS I-Switch Software will support up to eight

CORONIS flat-panel displays on four BarcoMed Display Controllers. The

CORONIS I-Switch Software supports Windows 2000 and Windows XP.

The CORONIS I-Switch Software is designed to react

only

to changes in

physical orientation of the CORONIS flat-panel displays, not to changes

in screen resolution effected from the Windows Display Control Panel.

The CORONIS I-Switch Software functions only after the CORONIS

Windows Display Controller Drivers have been installed, the resolution

set using the Windows Display Control Panel and the CORONIS I-Switch

Software has been installed.

CORONIS I-Switch Software has a limited user interface available through

an icon in the system status tray. The system tray icon is just a toggle to

put the service to sleep. During this sleeping phase, the Service will

continue to track changes in the physical orientation. The service will

use these saved settings to set the appropriate state model on startup.

Windows 2000 and Windows XP

Although Windows 2000 and Windows XP support multiple types of

display controllers, they support only one resolution per display

controller. Rotating a single head on any given BarcoMed Display

Controller will affect both of the heads connected to that display