User manual

Barco DPMS Screen Saver
80
Note: If you make any changes to any of the settings of one of
the three default schemes, the Current Scheme field will blank and
you MUST SAVE your changes by clicking on the “Save As ...”
button. When you click on the “Save As ...” button, the name of
the last scheme you used will be automatically displayed, you can
then choose to use that scheme name or enter a new name. If you
enter a name other than one of the three default scheme names,
the program will ask you if you wish to save the scheme as a
DEFAULT scheme (figure 36 below). Click “Yes” to save the
settings scheme as a DEFAULT scheme, click “No” to save the
scheme as a PRIVATE scheme. After you have saved the scheme,
then click OK and the new scheme will be in effect.
Figure 36
To create a new scheme by modifying one of the three default schemes
please do the following.
1. Open the “Display Properties Control Panel” by right clicking on an
empty space of the desktop and selecting “Properties” from the
drop down menu; then select the “Screen Saver” tab.
2. Select the “BARCO DPMS Screen Saver” in the “Screen Saver”
drop down menu if it is not already selected.
3. Click on the “Settings” button. The “BARCO DPMS Screen Saver
Control Panel” will open.
4. Select one of the default schemes from the “Current Scheme” drop
down menu.
5. Set the Work Schedule by setting the beginning and ending time
of your work day for each day of the week.