User manual

Barco DPMS Screen Saver
75
End Work Day
The “End Work Day” time is the time after which the system is not
expected to be used any more for that day. After the work day, the
display is set to one of the DPMS states (Stand-By, Suspend, or Off) by
the display controller during user inactivity.
Screen Saver During Work Day
On LCD based displays, such as the Barco CORONIS displays, it is not
necessary to invoke a screen saver as there is no CRT phosphor to
preserve. However, one can extend the life of the backlight in the LCD
display, in addition to realizing great power savings, during period of
user inactivity by quickly entering the Off state. We recommend setting
the work day to be as short as possible to get the maximum power
savings on CORONIS displays.
Available Savers
Lists the Available Screen Savers.
Settings
Changes settings for the selected screen saver.
DPMS Settings After Work Day
If you have an display controller that supports DPMS calls, then you will
be able to set the DPMS Settings for after the work day. Otherwise, a
text box will be displayed telling you why DPMS functions are not
available.
Amount of Time in each DPMS State
After the work day, the display will be placed into one of the following
DPMS Power States: Stand-By, Suspend, or Off. The default setting is for
the display to directly go into the Off State and spend no time in the