User manual

Software Installation
54
Figure 21
Driver installation
6. Click “Next” on the Display Driver Wizard’s Welcome Screen to
continue or “Cancel” to exit the Display Driver Wizard and return
to the Software Install Wizard.
The Device Selection Screen’s dialog box should show only those
devices physically installed and supported by the BarcoMed
display controller driver on your BarcoMed Software CD. If there
are no BarcoMed devices installed, or if Windows does not
recognize the installed devices, or if the driver on your BarcoMed
Software CD does not support the installed devices, the dialog box
will be empty, and the BarcoMed driver wizard will exit when you
click “Finish” or “Cancel”. Select the device you want to install
and then click “Next”.
Caution: You can install the driver for only one type of BarcoMed
device at a time. If you have multiple types of BarcoMed devices
installed in your computer, you will need to rerun the installer to
install the drivers for the other devices.
If you select a device with an installed driver, the wizard will warn
you if the installed driver is newer than the one you are installing
(figure 22).