User manual

Display installation

Figure 13

Video connection

Connecting DVI cables: One display:

Figure 14

1. Connect one end of the DVI cable to the DVI input of the display.

2. Connect the other end of the DVI cable to the DVI connector of the

display controller board. If this board has 2 video heads (2 video

outputs), connect to output Vid 1 (Head A).

Connecting DVI cables: Two displays:

1. Connect the left display (when looking at the front side) to display

controller output Vid 1 (Head A) as described above.

2. Connect the second display to output Vid 2 (Head B).

(1)