User manual

Parts, controls and connectors

It allows to put the display in stand-by, navigate through the on-

screen display (OSD) menus and change values in the OSD.

Rear

Figure 2

1. Connector compartment cover

To get access to the connectors, remove the cover by pulling down

the 2 clips at the top of the cover.

2. Tilt & swivel foot cover

This cover is packed in a separate box when the display is shipped

to the customer.

3. Tilt & swivel foot

4. Slot for security cable (e.g., Kensington lock)

5. DVI (digital) video input

6. USB upstream port

Connect this connector to the PC USB bus if you wish to connect

USB devices to the display’s USB downstream port.

7. USB downstream port

6 7