User manual

BarcoMed Hardware Tab
117
Using The BarcoMed Hardware Tab
To access the BarcoMed Hardware Tab do the following:
1. Open the “Display Properties Control Panel” by right clicking on the
desktop, then select “Properties”.
2. Click on the “Settings” tab. Double click on the rectangle that
represents one of the heads of the BarcoMed Display Controller
you are working with to bring up its properties page. Click on the
“BarcoMed Hardware Tab” (see figure 47 on page 118).
BarcoMed 3MP2FH
PCI and Firmware
Information
BarcoMed 5MP1H PCI Information Only
BarcoMed 5MP1HM
PCI and Firmware
Information
BarcoMed 5MP2 PCI Information Only
BarcoMed
5MP2 AURA
PCI and Firmware
Information
BarcoMed
Coronis 5MP
PCI and Firmware
Information
BarcoMed 5MP2F
PCI and Firmware
Information
BarcoMed 5MP2FH
PCI and Firmware
Information
Table 2:
AURA
Controllers
Non-AURA
Controllers
BarcoMed
Hardware Tab
Support