Specifications

System manual Coronis 1MP 69
BarcoMed software driver installation
Reinstalling the BarcoMed Driver
To reinstall only the BarcoMed Driver, follow the steps described in
the section “Using the BarcoMed Product Installation Wizard” with
the following changes.
1. Skip Step 1.
2. In Step 4, clear the checkboxes next to the BARCO DPMS and the
CORONIS Rotation Service.
3. When the driver has finished installing, click “Finish”. Then click
“Quit”. Reboot the system when prompted and then reset the
resolution of your displays if necessary.