Specifications

System manual Coronis 1MP 15
PLANNING YOUR 3MP2FH, 2MP2FH
OR 1MP2FH INSTALLATION
Important installation considerations
Preparations before installation
1 Make certain all equipment is switched off.
2 In case you use a PCI expansion chassis, please install it following
the guidelines in its User’s Guide.
3 Familiarize yourself with the 3MP2FH, 2MP2FH or 1MP2FH
Display Controller and the cables used to connect it to the display
panel.
4 Read through this guide from beginning to end.
Operating system requirements
You must have Windows NT 4 with at least Service Pack 4,
Windows 2000 with at least Service Pack 1 or Windows XP installed
on the PC.
BarcoMed installation overview
To install the BarcoMed Display Controller(s) in your system, you have
to follow these steps:
1 Install the display controller(s) in the PC
2 Install and connect the displays to the display controller(s)
3 Install the BarcoMed driver software
Display controller installation