Specifications

Page 4 of 5
Barco, President Kennedypark 35
8500, Kortrijk, BELGIUM
www.barco.com
ClickShare FAQ
Q: Is it possible to extend the distance of the wireless network range between
the Base Unit and ClickShare Button with a repeater?
A: No, it is not possible to do that in the first release of the product.
Q: Is it possible to limit the signal strength of the wireless network of the
Base Unit?
A: No, it is not possible to do that in the first release of the product.
Q: Do you offer an antenna extension cable?
A: No. Note that extending the antenna with an extension cable has an impact on the quality of the
signal. This signal quality depends on the quality of the extension cable and the extension distance.
Q: What is the type of antenna connector on the Base Unit?
A: The type is RP-SMA. Note that it is not permitted to use other antennas than the ones provided with
the Base Unit.
Q: How many Base Units can I install within each other’s range?
A: As with other wireless networks based on IEEE 802.11, this depends heavily on the existing
environment, meaning infrastructure of the building and other wireless networks and devices that are
sharing the spectrum with the ClickShare Base Units. It will also depend on the type of content that is
shared, using the ClickShare Buttons.
As a reference, 1 ClickShare Button sharing HD video will consume approximately 8-10Mbps. The
maximum physical rate of the WiFi module of the ClickShare Button is 65Mbps.
Q: How many WiFi channels are available?
A: The number of available channels depends on the geographical region.
Channel
number
Channel
centre
frequency
(MHz)
United
States
Canada
China
South Korea
Taiwan
Japan
1
2412
X
X
X
2
2417
X
X
X
3
2422
X
X
X
4
2427
X
X
X
5
2432
X
X
X
6
2437
X
X
X
7
2442
X
X
X
8
2447
X
X
X
9
2452
X
X
X
10
2457
X
X
X
11
2462
X
X
X
12
2467
X
13
2472
X
36
5180
X
X
40
5200
X
X
44
5220
X
X
48
5240
X
X
149
5745
X
X
153
5765
X
X
157
5785
X
X
161
5805
X
X
165
5825
x
All Wifi channels used by the ClickShare system are 20MHz wide