User`s manual

6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 05 - Aug 2005
________________________________________________________________________
6-22
Figure 6-31
dialog box warning about the projector switching to standby
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The
Timer can also be disabled.
To enable the timer and to set the countdown time proceed as follows:
• User the cursor key to highlight Standby timer.
• Press Enter to select
A dialog box is displayed:
Figure 6-32
dialog box to control the Standby timer
The current status is indicated by a selected radio button.
To select the other status, proceed as follows:
• Use the cursor key to highlight the desired status.
• Press Enter to select.
To change the countdown time, proceed as follows:
• Use the cursor keys to browse to the input field
• Enter the desired value by means of the numeric keys on the RCU.
• Press Enter to activate