User`s manual

6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 05 - Aug 2005
________________________________________________________________________
6-21
6.6.4 Automatic startup
Figure 6-29
Status menu, Automatic startup
To view or switch on/off the Automatic startup, proceed as follows:
• Use the cursor key to highlight Automatic startup.
• Press Enter to select.
The currently selected status is indicated by white dot.
• Use the cursor key to highlight the desired status.
• Press Enter to select.
If Automatic startup is ON, the projector will immediately be started after being connected to the mains (power
switch switched on).
If Automatic startup is OFF, the projector will go in Standby mode after being connected to the mains (power
switch switched on).
6.6.5 Standby timer
Figure 6-30
Status menu, Standby timer
If there is no signal, and the standby timer is enabled, a dialog box is displayed and the projector will shut down
after a determined time (power save).