User`s manual

6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 05 - Aug 2005
________________________________________________________________________
6-15
6.6 Status Menu
This menu allows checking and controlling the projector identification parameters as well as setting some opera-
tion features.
6.6.1 Identification
Figure 6-23
Status menu, Identification
To view the projector identification, proceed as follows:
• Use the cursor key to highlight Identification.
• Press Enter to select.
A submenu with the entries Short and Long is opened
 Use the cursor key to highlight the desired status information.
 Press Enter to select.
If Short is selected, the following dialog is displayed which shows type, address, software version, baudrate,
orientation, and the serial numbers of the projector:
Figure 6-24
projector identification short: dialog box showing the projector properties
This dialog is also shown during starting up the projector if operation|startup screen is
enabled.